Get Paid To Promote, Get Paid To Popup, Get Paid Display Banner

Thursday, February 26, 2009

Beardog Racing Lotus 34


The Beardog Racing Lotus 34 has been a labour of love. Finding the reference has taken many hours of research and surfing Slotforum and the web. Again only 50 will be produced, complete with decals to assemble either the car as it is now in the Parnelli Jones museum, or as it raced in the1964 Indianapolis 500.

Colin Chapman built three Lotus 34's for the Indianapolis 500 in 1964, each one had the same specifications, Engine: V8, dual overhead camshafts per bank, fuel injected, 255ci. 475bhp at 8,250rpm; Gearbox: ZF two-speed, Suspension: four wheel independent; Chassis: offset to left of centerline by 2 3/8 inches; Brakes: four wheel disc. Single seat speedway racing car. All three were entered by the works team. All three cars were used in practice.

Team Lotus, showed up in 1963 with the then-new (and very controversial!) 15" Firestone tires, but for 1964, Colin Chapman (over the objections of Ford!) brought Dunlop to the Speedway, apparently for the contingency money, depending on whose account you read. Dunlop apparently did not figure on the sustained high speeds of Indy, especially when compared to their normal venue of road racing, and supplied tires with treads that were either too thick, too soft, or both.

The car modeled is the car that Jim Clark raced at the 1964 Indianapolis 500, earning the pole position with a speed 159.337 which was 7 mph faster than the lap record. During the race Jim had severe problems with the Dunlop tyres and only completed 44 laps. His car experienced tread "chunking" midway into the event, which quickly developed into the tread peeling off the tire, the resultant imbalance and extreme vibration breaking the left side rear suspension, and ending his race prematurely.

Beardog kits are available with everything you need to build a very unusual Slot Car. All components are ala carte, Body kit, 4 different motor choices, Chassis kit, Wheels and world renowned Ortman Tyres are all available, so that the customer can build a fast competitive racing slot-car, or a beautiful shelf queen with a full length driver and interior.

BODY KIT COMPONENTS:Resin Parts: Body, Driver figure, Driver head, Seat and Dashboard, Engine Intake manifolds and Exhaust, Gearbox Transaxle, 4 Wheel Inserts.White Metal parts : Fuel fillers, Steering wheel, Engine Transistor Box, Roll Bar, 8 fuel Injection Trumpets,Polycarbonate Windscreen, and a comprehensive Decal sheet featuring two styles of race numbers, for practice, race and as the car appears now, Instruments Dials, Rivet Details, Dutz Fasteners, Seatbelts, Lotus Decals, Racing Stripe, and full sponsor decals.

Each body kit comes complete with full color history and photos of all three Lotus 34's.

THE CHASSIS KIT: Spring Steel Chassis kit with assembly guide, Drill blank 3/32” Rear axle, Rear axle Oilite Bearings, 16G piano wire front axle and brass tubing for front wheel retainers, Guide flag, Pick up braids, Silicon leadwire and ferrules, Precision Crown Gear, and Optional Rear Axle Ballrace Set.63 with the then-new (and very controversial!) 15" Firestone tires, but for 1964, Colin Chapman (over the objections of Ford!) brought Dunlop to the Speedway, apparently for

MOTOR PACKS: No less than 4 motor pack options are available from mild to wild.

WHEELS AND TYRES: Superb quality aluminium wheels and world renowned Ortman Tyres.

FURTHER INFORMATION IS AVAILABLE BY CONTACTING CHRIS WRIGHT AT: beardogracing@comcast.net or visiting www.beardogracing.net

ANDY BROWN-SEARLE AT abSlotsport@aol.com or visiting www.abslotsport.com

No comments:

Post a Comment